Table of Contents
Advertisement
change in the waveform display.
Note: Averaging reduces random noise and let you view the signal details more easily.
See the figure below for better understanding
6.4 Example 4: Capturing Single-shot Signal
You may refer to the following example to easily capture some aperiodic signals like pulses and
glitches.
To set for a single-shot acquisition, follow the steps below.
1.
First, set up the oscilloscope probe and the attenuation factor of CH1.
2.
Click the vertical VOLTS and horizontal TIME/DIV keys to a proper position for a better
examination of the signal.
3.
Enter the Acquire menu.
4.
Push the Mode button to select Peak Detect.
5.
Push the TRIG MENU button and select Rising for the Slope option. Then adjust the trigger
level properly.
6.
Select Single mode to start the acquisition.
Using this feature can help you to capture occasional events more easily. This is an advantage of
the HandHeld oscilloscope.
DSO1000E Series HandHeld Oscilloscope User Manual
Application Examples
47
Advertisement
Table of Contents
