Oscilloscope Trend - Hantek DSO1000E Series User Manual

Display mode normal
All view
Record Status Run
Stop
1/2
Manual Off
On
Return
2/2
Multimeter trend application example
Start trend function
Operation steps:
1. Input a measured signal correctly. See
2. Press 【F4】or【F5】to enter Trend at the multimeter main menu.
Also user can press "RECORDER" button to enter the "Trend".
The device will record the measurement value of the input port continuously and plot
measurements over time.
3. Press【F4】to stop or run recording data.
4. At the second page of the menu you can choose manual or auto mode to record the data.
After select Manual as "On", record data manually. A Record presses a record.
Display the record data
【F3】
5. Press to choose data display mode.
Normal mode: the screen displays the data up to the minute. The recorded data before saved in
the memorizer.
All view mode: the screen display all recorded data in the memorizer.
6. Data analysis: move cursor, analyzing data over time.
cursor.
7. Press 【Return】to exit trend.

8.2 Oscilloscope Trend

Scope Trend Function Menu
Option Setting
Restart
Source Select the source
Param Choose the
parameter to be
measured.
DSO1000E Series HandHeld Oscilloscope User Manual
Display the recorded data up to the minute.
Display all dots.
Record data automatically
Stop record data
Enter the second page of the menu
Record data automatically
Record data manually. A Record presses a record.
Return to the multimeter function state
Return to the first page.
chapter 7 Multimeter.
Please press direction key to move
Instruction
Quilt the current data and start to record afresh.
CH1, CH2
Mean, Pk-Pk, Frequency, Period, Minimum, Maximum
Recorder
71