Table of Contents
Advertisement
Measuring Pulse Width
To analyze a pulse signal and to know its width, follow the steps below.
1.
Push the CURSOR button to view the Cursor menu.
2.
Push F1 the Type option button and select Time.
3.
Push F2 the Source option button and select CH1.
4.
Select a cursor. If S is selected, move Cursor S on the screen; if E is selected, move Cursor E;
if both are selected, move them at the same time.
5.
Place Cursor S on the rising edge of the pulse and Cursor E on the falling edge.
6.
Thus at Delta displays the measured time and at Cursor S and Cursor E displays the time
relative to the trigger.
See the figure below for better understanding.
Measuring Rise Time of Pulse
You may need to measure the rise time of the pulse in many application environments, usually, to
DSO1000E Series HandHeld Oscilloscope User Manual
Application Examples
44
Advertisement
Table of Contents
