Time Cursor
5.6 Fast Action Buttons
AUTORANGE: Automatically set the oscilloscope controls to generate a usable display of the
input signals in real time.
AUTOSET: Automatically set the oscilloscope controls to generate a usable display of the input
signals. Refer to the following table for relative content.
RUN/STOP: Continuously acquire waveforms or stop the acquisition.
5.6.1 AUTOSET
Autoset is one of the advantages digital oscilloscopes have. When you push the AUTO button, the
oscilloscope will identify the type of waveform (sine or square wave) and adjust controls according
to input signals so that it can accurately display the waveform of the input signal.
Functions
Acquire Mode
Cursor
Display Format
Display Type
Horizontal Position
TIME/DIV
Trigger Coupling
Trigger Holdoff
DSO1000E Series HandHeld Oscilloscope User Manual
Adjusted to Normal or Peak Detect
Off
Set to YT
Set to Vectors for an FFT spectrum; otherwise, unchanged
Adjusted
Adjusted
Adjusted to DC, Noise Reject or HF Reject
Minimum
Voltage Cursor
Settings
Basic Operation
38