Acquire - Hantek DSO1000E Series User Manual

5.5.5 ACQUIRE

Press "UTILITY" key to enter the Utility menu and turn to the page 4/5 and then Push the
ACQUIRE key to set the acquisition parameter.
Options
Real Time
Type
Equ-Time
Normal
Mode
Peak Detect
(Real Time)
Average
Averages
4, 8, 16, 32, 64, 128
(Real Time)
LongMem
4K, 40K, 512K, 1M, 2M Select the memory depth for different board models.
(Real Time)
Normal: For the oscilloscope model with the bandwidth of 100MHz, the maximum sample rate is
1GS/s. For time base with insufficient sample rate, you may use the Sine Interpolation Algorithm to
interpolate points between sampled points to produce a complete waveform record (4K by
default).
Sample Points
Peak Detect: Use this mode to detect glitches within 10ns and to limit the possibility of aliasing.
This mode is valid at the TIME/DIV setting of 4µs/div or slower. Once you set the TIME/DIV setting
to 4µs/div or faster, the acquisition mode will change to Normal because the sample rate is fast
enough that Peak Detect is unnecessary. The oscilloscope does not display a message to tell you
that the mode has been changed to Normal.
Average: Use this mode to reduce random or uncorrelated noise in the signal to be displayed.
Acquire data in Normal mode and then average a great number of waveforms. Choose the
number of acquisitions (4, 16, 64 or 128) to average for the waveform.
Stopping the Acquisition: When you are running the acquisition, the waveform display is live.
Stop the acquisition (press the RUN/STOP button) to freeze the display. In either mode, the
DSO1000E Series HandHeld Oscilloscope User Manual
Settings
Normal Acquisition Intervals
1 2 3 4
Normal Mode Acquires a Single Sample Point in Each Interval
Comments
Acquire waveforms by real-time digital technique.
Rebuild waveforms by equivalent sample technique.
Acquire and accurately display most waveforms.
Detect glitches and eliminate the possibility of
aliasing.
Reduce random or uncorrelated noise in signal
display. The number of averages is selectable.
Select the number of averages.
5 6 7 8 9 10
Basic Operation
36