Table of Contents
Advertisement
Taking Auto Measurements
The oscilloscope can display most signals by automatic measurements. To measure such
parameters as the signal frequency, period, peak-to-peak amplitude, rise time and positive width,
follow the steps below.
1.
Push the MEAS button to see the Measure menu.
Select the first 'unspecified' option (marked by red arrow), and then enter the submenu.
2.
3.
Select CH1 for the Source option. Then repeatedly select measure items in the Type menu.
Push the back menu to go back to the measure interface. The corresponding box under the
measure item shows the measurements.
4.
Repeat Step 2 and Step 3. Then select other measure items. Totally 4 measure items can be
displayed.
Note: All readouts change with the measured signals.
The figure below shows three measure items as an example. The boxes under them display the
measurements in large fonts.
DSO1000E Series HandHeld Oscilloscope User Manual
Application Examples
42
Advertisement
Table of Contents
