Menu And Option Buttons; Save/Recall - Hantek DSO1000E Series User Manual

5.5 Menu and Option Buttons

As shown below, these four buttons at the front panel are used mainly to recall relative setup
menus.
SAVE/RECALL: Displays the Save/Recall menu for setups and waveforms.
MEASURE: Displays the Measure menu.
UTIILITY: Displays the Utility menu.
CURSOR: Displays the Cursor menu.

5.5.1 SAVE/RECALL

Press the SAVE/RECALL button to save or recall oscilloscope setups or waveforms.
Options Settings
Wave
Setup
CSV
Default
Save
Wave
Options Settings
Wave
CH1
Source
CH2
USB
Media Flash
SD
Location 0-1000
Save
Recall
Delete
Options Settings
Setup
Local
Source
USB disk
Location 0 to 9
Save
Recall
DSO1000E Series HandHeld Oscilloscope User Manual
Enter the Save Wave menu.
Enter the S/R Setup menu.
Enter the CSV menu.
Recall default setup.
Save the screen picture.
Select a waveform display to store.
Select media.
Save the source waveform to the selected reference location.
Display the reference waveform on the screen.
Delete waveform.
Store the current setups to the USB disk or the memory of the
oscilloscope.
Specify the memory location in which to store the current
waveform settings or from which to recall the waveform settings.
Complete the saving operation.
Recall the oscilloscope settings stored in the location selected in
Comments
Comments
Comments
Basic Operation
31