Safety Guidelines For Installation - Thermo Scientific VH-D20 Operating Manual

5 • Installation
5.1

Safety Guidelines for Installation

Page 46
Pay attention to the following safety guidelines:
Observe all warning messages and precautionary statements presented
in Safety Precautions (} page 21).
CAUTION—Heavy Load, Bulky Device
The device is too heavy or bulky for one person alone to handle safely.
To avoid personal injury or damage to the device, observe the following
guidelines:
• Physical handling of the device, including lifting or moving, requires
a team effort of two persons.
• A team effort is in particular required when lifting the device into
the system stack or when removing it.
• Use the carrying handles that were shipped with the device to move
or transport the device. Never move or lift the device by the front
doors. This will damage the doors or the device.
CAUTION—Electric Shock or Damage to the Device
After the power to the device is turned off, the device is still energized
as long as the power cord is connected. Repair work on the device while
the device is connected to power could lead to personal injury.
• Always unplug the power cord before starting repair work inside the
device.
• If you were instructed to remove any housing covers or panels, do
not connect the power cord to the device while the cover or panels
are removed.
Charged Aerosol Detectors (VH-D20, VF-D20)
Operating Manual