Thermo Scientific VH-D20 Operating Manual page 144

7 • Maintenance and Service
Page 144
3. Slightly tilt the door to the outside, away from the housing, and
remove the door.
4. To install the door, align the door with the hinges on the housing. Do
not clamp tubing or capillaries between the door and the enclosure.
5. Insert the hinges in the groove, by pushing up and slightly turning
the door.
6. Push the door downward to lock it in place.
You can close the door only when it is properly installed.
Charged Aerosol Detectors (VH-D20, VF-D20)
Operating Manual