Features - STMicroelectronics STM32H7 User Manual

Features

1 Features
The STM32H7 Nucleo-144 boards offer the following features:
•
STM32H7 Arm
•
Ethernet compliant with IEEE-802.3-2002 (depending on STM32H7 support)
• USB OTG full-speed
•
3 user LEDs
• 2 push-buttons: USER and RESET
•
LSE crystal:
–
•
Board connectors:
–
–
–
–
–
•
Flexible power supply options: ST-LINK USB V
•
On-board STLINK-V3E debugger/programmer with SWD connector:
–
–
•
Comprehensive free software libraries and examples available with the STM32Cube
package
• Support of a wide choice of Integrated Development Environments (IDEs) including
IAR Embedded Workbench
a. Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
6/49
®(a) ®
Cortex
32.768 kHz crystal oscillator
USB with Micro-AB
Ethernet RJ45
MIPI-10
ST Zio including ARDUINO
ST morpho expansion connector
USB reenumeration capability: Virtual COM port, mass storage, debug port
STLINK-V3E standalone kit capability
core-based microcontroller in an LQFP144 package
®
Uno V3 expansion connectors
BUS
®
, MDK-ARM, and STM32CubeIDE
UM2407 Rev 3
or external sources
UM2407