Board Revision History; Table 24. Board Revision History - STMicroelectronics STM32H7 User Manual

UM2407
Order Product
code identification
NUH723ZG$AT1
9.3

Board revision history

Board reference
MB1364
Table 23. Product history (continued)
Product details
MCU:
– STM32H723ZGT6
revision 'Z'
MCU errata sheet:
– STM32H72xx/73xx
device errata (ES0491)
Board:
– MB1364-H723ZG-E01

Table 24. Board revision history

Board variant and
revision
MB1364-H743ZI-C01
MB1364-H753ZI-C01
MB1364-H743ZI-E01
MB1364-H753ZI-E01
MB1364-H723ZG-E01
UM2407 Rev 3
Nucleo-144 boards (MB1364) information
Product change
description
Initial revision
Board change
description
Initial revision
The IDD measurement of
the STM32H7x3 MCU can
be measured in Standby
mode. The ETH PHY is
powered by VDD and is
separated from
VDD_MCU.
The silkscreen has been
corrected on the morpho
connectors.
Product limitations
No limitation
Board limitations
The IDD measurement of
the STM32H7x3 MCU
cannot be performed in
Standby mode because of
ETH PHY (U15) and the
pull-up resistors (R40,
R43, R46, R47, and R48)
supplied by VDD_MCU.
No limitation
45/49
48