Features - STMicroelectronics STM32F469I-DISCO User Manual

Features

1 Features
•
STM32F469NIH6 microcontroller with 2 Mbytes of Flash memory and 324 Kbytes of
RAM, in BGA216 package
•
4-inch 800x480 pixel TFT color LCD with MIPI DSI
screen
• USB OTG FS
•
SAI audio DAC
•
3 ST-MEMS digital microphones
•
128-Mbit Quad-SPI NOR Flash memory
•
4 M×32bit SDRAM
•
Reset and wake-up push-buttons
•
4 color user LEDs
•
Board connectors:
–
–
–
–
–
–
•
Flexible power-supply options: ST-LINK, USB V
•
Comprehensive free software libraries and examples available with the STM32Cube
MCU Package
• On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability:
mass storage, Virtual COM port, and debug port
•
Support of a wide choice of Integrated Development Environments (IDEs) including
IAR™, Keil
a. Arm and Mbed are registered trademarks or trademarks of Arm Limited (or its subsidiaries) in the US and
or elsewhere.
6/30
microSD™ card
USB with Micro-AB
Stereo headphone output jack
2
I C expansion connector
®
ARDUINO Uno V3 expansion connectors
2.54 mm pitch expansion connector
®
, STM32CubeIDE, and Arm
BUS
®
Mbed™
UM1932 Rev 3
SM
interface and capacitive touch
or external sources
(a)
UM1932