Operating Menu - Watts Aerco Benchmark OMM-0117 Operation And Maintenance Manual

Benchmark 5000-6000 Operation & Maintenance Manual
SECTION 2: OPERATION

2.4 OPERATING Menu

The Operating menu displays a number of key operating parameters for the unit. All items in this
menu except O2 Monitor (item 15) are "Read-Only" and cannot be changed. This menu can be
accessed without entering a password.
A full description of each item appears in Appendix A-1.
TABLE 2-2: OPERATING Menu
MENU ITEM DISPLAY
1 Active Setpoint
2 Outlet Temp
3 Inlet Temp
4 Air Temp
5 Outdoor Temp
6 Valve Position In
7 Valve Position Out
8 FFWD Temp
9 Exhaust Temp
10 Flame Strength
11 Min Flame Str
12 O2 Monitor
13 Oxygen Level
14 Ignition Time
15 SSOV Time to OPN
16 Air Pump Voltage
17 Run Cycles
18 Run Hours
19 Fault Log
20 Manual Valve Pos *
* NOTE
Manual Valve Pos does not appear in this menu unless you push the Auto/Man button on
the C-More Controller's front face.
OMM-0118_B • GF-203 • 5/9/2019
AVAILABLE CHOICES OR LIMITS
Minimum
40°F (4.4°C) 240°F (116°C)
30°F (-1.1°C) 240°F (116°C)
30°F (-1.1°C) 240°F (116°C)
-70°F (-56.7°C) 245°F (118°C)
-70°F (-56.7°C) 130°F (54.4°C)
0%
0%
30°F (-1.1°C) 240°F (115.6°C)
Displays current exhaust temperature
0%
Not Used
Enable
0%
0.00
0.00
0.20 V
0 999,999,999
0 999,999,999
0
0
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Appears Only If
Enabled in:
Maximum
Configuration Menu
Configuration Menu
100%
100% Configuration Menu
100%
Disable
21% O2 Monitor = Enabled
10.00
10.00
1.2 V
19
100
Page 19 of 148