Watts Aerco Benchmark OMM-0117 Operation And Maintenance Manual page 22

Benchmark 5000-6000 Operation & Maintenance Manual
SECTION 2: OPERATION
TABLE 2-4: CONFIGURATION Menu
MENU ITEM DISPLAY
12 Setpt Hi Limit
Temp Hi Limit
13
Max Valve Position
14
15 Pump Delay Timer
Aux Start On Dly
16
Failsafe Mode
17
18
Analog Output
19 Low Fire Timer
Setpt Limiting
20
Setpt Limit Band
21
Network Timeout
22
23 Shutoff Dly Temp
Demand Offset
24
Deadband High
25
Deadband Low
26
27 IGST Version
28 IGN Time Setting
29 Slow Shutdown
30 Slow Sht Duration
Slow Sht Threshold
31
O2 Warnings
32
O2 Trim ID
33
Fixed ID
34
35 O2 Trim Key
O2 Trim Menu
36
37 BST Menu
*NOTE
The Bldg Ref Temp and Reset Ratio menu Items are only displayed when the Outdoor
Sensor menu item is set to Enabled.
CAUTION!
DO NOT change the Analog Output menu item from its default setting (Valve Position 0-
10V).
OMM-0118_B • GF-203 • 5/9/2019
AVAILABLE CHOICES OR LIMITS
Minimum
Setpt Lo Limit 210°F (98.9°
40°F (4.4° 210°F (98.9°
C)
40%
0 min.
0 sec.
Shutdown or Constant Setpt
Off, Setpoint, Outlet Temp, Valve Pos
4-20mA, valve Pos 0-10v
2 sec.
Enabled or Disabled
0°F (0°C) 10°F (5.5°C)
5 sec.
25°F (13.75°C)
°
0°F (0 C)
°
0°F (0 C) 25°F (13.75
°
0°F (0 C) 25°F (13.75
°
0°F (0 C) 25°F (13.75
Displays current IGST version
Displays 4 sec. or 7 sec. depending on wiring harness installed
Enabled or Disabled
0 sec.
40%
Enabled or Disabled
Displays 4 digit AERtrim ID
Displays unit's fixed 4 digit ID
Displays AERtrim 4 digit license key
Enabled or Disabled
Enabled or Disabled
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Maximum
180°F (82.2°C)
C)
195°F (90.6°
C)
100%
30 min.
120 sec.
Constant Setpt
Valve Pos 0-10v
(Do NOT change)
600 sec.
999 sec.
°
C)
°
C)
°
C)
9,999 sec.
100%
DEFAULT
C)
100%
0 min.
0 sec.
2 sec.
Disabled
5°F (2.75°C)
30 sec.
10°F (5.5°C)
10°F (5.5°C)
5°F (2.75°C)
5°F (2.75°C)
V2.02
Disabled
60 sec.
60%
Disabled
Disabled
Disabled
Page 22 of 148