Operating Menu - Watts Aerco BENCHMARK 750 User Manual

Benchmark 750 – 1000 Boiler User Manual - INTERNATIONAL

3.4 OPERATING MENU

The Operating menu displays a number of key operating parameters for the unit as listed in
Table 3-2. This menu is "Read-Only" and does not allow personnel to change or adjust any
displayed items. Since this menu is "Read-Only", it can be viewed at any time without entering a
password. Pressing the ▲ arrow key to display the menu items in the order listed (Top-Down).
Pressing the ▼ arrow key will display the menu items in reverse order (Bottom-Up).
Menu Item Display
1 Active Setpoint
2 Inlet Temp
3 Air Temp
4 * Outdoor Temp
5 Valve Position In
6 * Valve Position Out
7 Exhaust Temp
8 Flame Strength
9 Oxygen Level
10 Ignition Time
11 SSOV Time to OPN
12 Spark Current
13 Run Cycles
14 Run Hours
15 Fault Log
The Outdoor Temp and Valve Position Out display items shown
with an asterisk in Table 3-2 will not be displayed unless the
Outdoor Sensor function has been enabled in the Configuration
menu (Table 3-4).
OMM-0119_0A
GF-130-I
CHAPTER 3 – OPERATION
Table 3-2: Operating Menu
Minimum
40°F (4.4°C)
40°F (4.4°C)
-70°F (-56.7°C)
-70°F (-56.7°C)
*NOTE
AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913
Ph.: 800-526-0288
Available Choices or Limits
Maximum
240°F (116°C)
140°F (60°C)
245°F (118°C)
130°F (54.4°C)
0%
0%
Current Temp, Read Only, in °F
0%
0%
0.00
0.00
Displays current value
0 999,999,999
0 999,999,999
0
100%
100%
100%
21%
10.00
10.00
19
Page 41 of 170
11/03/2016