Assigning Functions To Assignable Switches; Functions That Can Be Assigned To The Assign. 0 Switch - Sony PXW-X500 Manual

Assigning Functions to Assignable Switches

Using the Assignable Switch item of the Operation menu, you can assign user-specified functions to the
ASSIGN. 0 to 3 switches, the ASSIGNABLE 4 and 5 switches, the COLOR TEMP. button, and the RET
button on the lens.
The following tables lists the functions that are assigned when the camcorder is shipped from the factory.
Switch or button
ASSIGN. 0 switch
ASSIGN. 1 switch
ASSIGN. 2 switch
ASSIGN. 3 switch
ASSIGNABLE 4 switch
ASSIGNABLE 5 switch
RET button
COLOR TEMP. button

Functions That Can Be Assigned to the ASSIGN. 0 Switch

Assignable Switch
setting
Off
Marker
ATW Hold
Picture Cache
Focus Magnifier
Zebra
Shot Mark1
Shot Mark2
OK Mark
Clip Flag OK
Clip Flag NG
Clip Flag Keep
Function
No assignment
No assignment
No assignment
No assignment
No assignment
No assignment
Rec Review (if playback is allowed)
Adjusts white balance using 5600K preset value.
Function
No assignment
Turns the display of all markers on/off.
Holds the white balance setting in the ATW (auto-
tracking white balance) mode
Turns picture cache recording mode on/off.
Turns the focus magnification function on/off.
Turns zebra display on/off.
Writes Shot Mark1.
Writes Shot Mark2.
Adds or deletes an OK mark.
Adds/Clears an OK mark to/from the clip being recorded
or played.
Adds/Clears an NG mark to/from the clip being recorded
or played.
Adds/Clears a KP (Keep) mark to/from the clip being
recorded or played.
163
Assignable Switch setting
Off
Off
Off
Off
Off
Off
Lens RET
Color Temp SW 5600K
State when camcorder
is next powered on
—
Setting retained
—
Setting retained
Setting not retained
Setting not retained
—
—
—
Setting not retained
Setting not retained
Setting not retained