Assigning Functions To Assignable Switches - Sony PXW-X400KF Operating Instructions Manual

113 000
7. Menu Display and Settings

Assigning Functions to Assignable Switches

Using the Assignable Switch item of the Operation menu, you can assign user-specified functions to the
ASSIGN. 0 to 3 switches, the ASSIGNABLE 4 and 5 switches, the ONLINE button, and the RET button on the
lens.
The following tables lists the functions that are assigned when the camcorder is shipped from the factory.
Switch or button Function
ASSIGN. 0 switch No assignment
ASSIGN. 1 switch No assignment
ASSIGN. 2 switch No assignment
ASSIGN. 3 switch No assignment
ASSIGNABLE 4 switch No assignment
ASSIGNABLE 5 switch No assignment
RET button Rec Review (if playback is allowed)
ONLINE button Auto transfer proxy clip
Functions That Can Be Assigned to the ASSIGN. 0 Switch
Assignable Switch setting Function
Off No assignment
Marker Turns the display of all markers on/off.
ATW Hold Holds the white balance setting in the ATW
(auto-tracking white balance) mode
Picture Cache Rec Turns picture cache recording mode on/off.
Focus Magnifier Turns the focus magnification function on/off.
Zebra Turns zebra display on/off.
Shot Mark1 Writes Shot Mark1.
Shot Mark2 Writes Shot Mark2.
Clip Flag OK Adds/Clears an OK mark to/from the clip being
recorded or played.
Clip Flag NG Adds/Clears an NG mark to/from the clip being
recorded or played.
Clip Flag Keep Adds/Clears a KP (Keep) mark to/from the clip
being recorded or played.
Flash Band Reduce Turns the flashband correction function on/off.
1)
1) Even when Flash Band Reduce is set to On, the function does not operate if the SHUTTER switch is set to ON.
Functions That Can Be Assigned to the ASSIGN. 2 Switch
[Note]
Assignable Switch setting
Immediately after you assign a function to the ASSIGN. 2 switch or you switch the recording format, the setting of the switch at
that point may not match the camcorder's internal state. After assigning a function, switch the ASSIGN. 2 switch or power the
Off
camcorder off and on again.
Off
Assignable Switch setting Function
Off
Off
Off
Front Mic
Off
Marker
Off
Picture Cache Rec
Lens RET
Zebra
Network Client Mode
Clip Continuous Rec
Rec Source
Digital Extender ×2
Digital Extender ×3
Digital Extender ×4
State when camcorder is
1) When Picture Cache Rec is assigned, Operation >Rec Function is disabled (grayed out) and cannot be set.
next powered on
—
Setting retained
—
Setting retained
Setting not retained
Setting not retained
—
—
Setting not retained
Setting not retained
Setting not retained
Setting not retained
No assignment
Switches between stereo and monaural when a stereo microphone is connected.
Turns the display of all markers on/off.
1) Turns picture cache recording mode on/off.
Turns zebra display on/off.
Turns Clip Continuous Rec mode on/off.
Switches the signals to be recorded between the camera picture and external
input. (If the camcorder is currently recording or playing, the switch takes effect
after recording or playback ends.)
Turns the screen magnification (×2) function on/off.
Turns the screen magnification (×3) function on/off.
Turns the screen magnification (×4) function on/off.