Log In To The Home Page - CyberData 011324 Series Operation Manual

2.3.4 Log in to the Home Page

1. Open your browser to the device IP address.
Note
Note
Note
Note
2. When prompted, use the following default Web Access Username and Web Access
Operations Guide
If the network does not have access to a DHCP server, the device will default to an IP
address of 192.168.123.
Make sure that the PC is on the same IP network as the SIP Paging Amplifier.
You may also download CyberData's VoIP Discovery Utility program which allows you to
easily find and configure the default web address of the CyberData VoIP products. 

CyberData's VoIP Discovery Utility program is available at the following website address:
https://www.cyberdata.net/pages/discovery
The device ships in DHCP mode. To get to the Home page, use the discovery utility to scan
for the device on the network and open your browser from there.
Password to access the Home Page
Web Access Username: admin
Web Access Password: admin
(Figure 2-23):
931971A
Installing the SIP Paging Amplifier
SIP Paging Amplifier Setup
CyberData Corporation
28