Log In To The Configuration Home Page - CyberData 011097 Operation Manual

Voip v2 loudspeaker amplifier (poe)

Hide thumbs Also See for 011097:

Table of Contents

2.3.2 Log in to the Configuration Home Page

1. Open your browser to the Loudspeaker Amplifier IP address.

Note

The Loudspeaker Amplifier ships in DHCP mode. To get to the Home page, use the discovery utility

to scan for the device on the network and open your browser from there.

Operations Guide

If the network does not have access to a DHCP server, the device will default to an IP

address of 10.10.10.10.

Make sure that the PC is on the same IP network as the Loudspeaker Amplifier.

You may also download CyberData's VoIP Discovery Utility program which allows you to

easily find and configure the default web address of the CyberData VoIP products. 



CyberData's VoIP Discovery Utility program is available on the VoIP V2 Loudspeaker

Amplifier product page at:

http://www.cyberdata.net/support/voip/discovery_utility.html

930362N

Installing the VoIP V2 Loudspeaker Amplifier

Configure the Loudspeaker Amplifier Parameters

CyberData Corporation

Table of Contents

Do you have a question about the 011097 and is the answer not in the manual?