Configure The Sip (Session Initiation Protocol) Parameters - CyberData 011324 Series Operation Manual

2.3.8 Configure the SIP (Session Initiation Protocol) Parameters

1. Click on the SIP menu button to open the SIP page
CyberData SIP Paging Amp
Operations Guide
Figure 2-27. SIP Page—Top
931971A
Installing the SIP Paging Amplifier
SIP Paging Amplifier Setup
(Figure 2-27).
The strobe settings will
only appear if you are
using the Strobe Kit.
If you are not using the
Strobe Kit, you will not
see the strobe settings.
CyberData Corporation
40