CyberData 011324 Series Operation Manual page 70

Web Page Item
Red
Green
Blue
Operations Guide
Table 2-17. Sensor Page Parameters (continued)
Description
Select desired color (only one may be chosen).
The red LED value for Sensor.
The green LED value for Sensor.
The blue LED value for Sensor.
Use this button to preview the strobe flashing behavior for the
Sensor Strobe Settings.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of
some of the web page items. First click on the Toggle Help
button, and you will see a question mark (
some of the web page items. Move the mouse pointer to hover
over a question mark to see a short description of a specific web
page item.
Click the Test Sensor button to test the sensor.
931971A
Installing the SIP Paging Amplifier
SIP Paging Amplifier Setup
) appear next to
CyberData Corporation
63