Configure The Multicast Parameters - CyberData 011324 Series Operation Manual

Sip paging amplifier

Hide thumbs Also See for 011324 Series:

Table of Contents

2.3.10 Configure the Multicast Parameters

The Multicast page allows the device to join up to ten paging zones for receiving ulaw/alaw encoded

RTP audio streams.

A paging zone can consist of one or many CyberData multicast group-enabled products. There is no

limit to how many speakers can be in a given paging zone. Each multicast group is defined by a

multicast address and port number.

Each multicast group is assigned a priority, allowing simultaneously arriving pages to be serviced

based on importance. Multicast groups are compatible with IGMP through version 3. The device

supports simultaneous SIP and Multicast.

Operations Guide

931971A

Installing the SIP Paging Amplifier

SIP Paging Amplifier Setup

CyberData Corporation

Table of Contents

Do you have a question about the 011324 Series and is the answer not in the manual?

021547 series