Configure The Autoprovisioning Parameters - CyberData 011324 Series Operation Manual

2.3.14 Configure the Autoprovisioning Parameters

Autoprovisioning can be used to automatically configure your device. The autoprovisioning file is an
xml file with the device configuration. Values found in this file will override values stored in on-board
memory.
Note
1. Click the Autoprov menu button to open the Autoprovisioning page. See
CyberData SIP Paging Amp
Operations Guide
By default, the device will try to set up its configuration with autoprovisioning.
Figure 2-42. Autoprovisioning Page
931971A
Installing the SIP Paging Amplifier
SIP Paging Amplifier Setup
Figure 2-42.
CyberData Corporation
75