CyberData 011324 Series Operation Manual page 60

Web Page Item
Test TLS Connection
Server
Port
List of Trusted CAs
Upload CA Certificate
Operations Guide
Table 2-15. SSL Configuration Parameters (continued)
Description
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of some of the web
page items. First click on the Toggle Help button, and you will see a question
mark ( ) appear next to some of the web page items. Move the mouse pointer
to hover over a question mark to see a short description of a specific web page
item.
The ssl test server address as a fully qualified domain name or in IPv4 dotted
decimal notation.
The supported range is 0-65536. SIP connections over TLS to port 5060 are
modified to connect to port 5061. This test button will do the same.
Use this button to test a TLS connection to a remote server using the sip client
key and password. This will attempt to make a socket connection to the
configured test server and port and report the success or failure. This can be
used to debug TLS connection issues separate from SIP registration issues.
Use this button to test a TLS connection to a remote server using the
autoprovisioning client key and password. This will attempt to make a socket
connection to the configured test server and port and report the success or
failure. This can be used to debug TLS connection issues with secure
autoprovisioning.
Use this button to select a configuration file to import.
Click Browse to select a CA certificate to import. After selecting a server
certificate authority (CA), click Import CA Certificate to import it to the list of
trusted CAs. CAs are used to validate the certificate presented by the server
when establishing a TLS connection.
Restore Defaults will restore the default list of registered CAs and Remove All
will remove all registered CAs.
Restore Defaults will restore the default list of registered CAs and Remove All
will remove all registered CAs.
Provides details of the certificate. After clicking on this button, the Certificate
Info Window appears. See
Removes this certificate from the list of trusted certificates. After clicking on this
button, the Remove Server Certificate Window appears. See
"Remove Server Certificate
931971A
Installing the SIP Paging Amplifier
Section 2.3.9.1, "Certificate Info
Window".
SIP Paging Amplifier Setup
Window".
Section 2.3.9.2,
CyberData Corporation
53