Table of Contents
Advertisement
Chapter 2 Installing the Library
Receiving the Library
Receiving the Library
Unpacking the
2
Library
14
When receiving the library from the shipper, unpack the library as
close to the installation location as possible.
Inspect the shipping pallet and carton for damage that may have
occurred during shipment and immediately report any damage to
the shipper.
Warning: The library weighs 37 lbs (17 kg). Two people should
perform any procedure that involves lifting or
moving the library.
Caution: If you are installing the rack mount version of the
library, use the PowerStor Rack Mount Installation Kit.
This kit provides necessary support brackets.
The unpacking instructions vary depending upon whether it is a
desktop or rack mount library. If it is a desktop library, you should
have only one shipping carton. If it is a rack mount library, you
will have two shipping cartons. The larger carton contains the
library, and the smaller carton contains the rack mount kit.
To unpack the library (see
Remove the accessory kit.
1
Remove the packing foam from the top of the library.
2
Remove the library from the shipping carton.
3
Remove the library from the shipping bag.
4
Place the library in the installation location. If it is a rack mount
5
library, refer to the instructions supplied with the PowerStor
Rack Mount Kit.
Save the box and its packing materials in case the library
6
requires shipment at a later date.
Quantum|ATL PowerStor L200 Series Library User's Guide
figure
8):
2
Advertisement
Table of Contents
