Viewing A Mode; Setting A Mode - Quantum PowerStor L200 Series User Manual

3

Viewing a Mode

3

Setting a Mode

Description
Autoclean (optional)
Toggles whether
or not the library
will automatically
cleans drives
when required
SetAutoUnloadCart (toggle)
Toggles whether
or not the library
will unload tape
drives before
unlocking door
To view the current library modes:
Press Select until the message Mode? is displayed.
1
Press Enter to display the message Random Selected.
2
Repeatedly press Next to display more modes.
3
Press Select to return to the main menu.
4
To set the current library modes:
Press Select until the message Mode? is displayed.
1
Press Enter to display the message Random Selected.
2
Press Next. Each mode option and status is displayed:
3
Quantum|ATL PowerStor L200 Series Library User's Guide
Chapter 3 Operator Control Panel
Messages Notes
See
• N
• Y Mode.
• CLN Slot
Empty!
• NOT a CLN Tape
• CLN Tape
Expired
• Completes
Successfully
• Requires v34+ firmware
Y
•
N
Y
drives at the
Door?
N
to remain in tape drives at
the
command
Optional Autoclean
(default) will unload tape
Unlock
command
will allow tape cartridges
Unlock Door?
Mode
33