Table of Contents
Advertisement
2
Error Messages
Table 26 OCP Error
Messages
OCP Display
Drive Stuck in Flux
Cartridge Fault
Door Unlocked
This appendix lists error messages, descriptions, and
recommended operator actions for the library.
This section lists error messages displayed on the OCP.
Description
This indicates that the drive
exceeded the timeout allowed for
that operation. The drive was still in
the flux state when the timeout
occurred.
The initial scan of the magazine slots
and the tape drive indicates that
there are more cartridges in the
system than there are slots to store
them.
Quantum|ATL PowerStor L200 Series Library User's Guide
Error Messages and
B
Recommended Operator Action
Cycle the library power and retry
the operation.
If the operation fails again, contact
an authorized field service engineer.
Remove excess cartridges.
Appendix B
Definitions
73
Advertisement
Table of Contents
