Status - Quantum PowerStor L200 Series User Manual

Status

OCP Menu
Information?
(continued)
Code Update
Tests
The STATUS? option displays tape drive and magazine slot status.
When the library is turned on, it conducts an automatic power-on
self-test (POST). Upon completion of the POST, the drives and the
library are initialized. The OCP buttons are not active during
initialization. Once the drives are initialized, the main menu
STATUS? options are described as library options. The following
messages are displayed:
• Library Init
• Library Active
• Library Idle
Quantum|ATL PowerStor L200 Series Library User's Guide
Chapter 3 Operator Control Panel
OCP Submenu
Drive Rev
Loader Life
Cycle
Current Cycles
LDR ERR: ##
Drive
Update Drive
Elevator Test
Short Load/
Unload Test
Long Ld/Unload
Test
Status
Description
Drive firmware revision
level in hex
Count from completion of
library 1 POST
From completion of POST
Displays drive and library
microcode levels
Installs microcode from
code update tape into
drive
3
25