Chapter 4 Using the Library
Using Tape Cartridges
Using Tape Cartridges
Inserting a
4
Cartridge
42
This section contains information on:
• Loading and unloading data cartridges
• Using cleaning cartridges
• Bar code labels
To insert a tape cartridge into the magazine:
Open the library door.
1
Verify that all library SCSI library activity has stopped (the
2
message Library Idle will be displayed on the OCP).
Set the write-protect switch on the tape cartridge to the desired
3
position (see
figure
Note: The cartridge is write-protected if the orange indicator
is visible. The cartridge is write-enabled if the orange
indicator is not visible.
Orient the tape cartridge with the write-protect switch at the
4
top (see
figure
Quantum|ATL PowerStor L200 Series Library User's Guide
12).
12).
4