Error Definitions; Table 27 Library Error Definitions - Quantum PowerStor L200 Series User Manual

Appendix B Error Messages and Definitions
2

Error Definitions

Table 27 Library
Error Definitions
Error
Code Error Type
Non-error
80H
Fatal
81H
Fatal
82H
Fatal
83H
Not Fatal
84H
Fatal
85H
Fatal
86H
Fatal
87H
Fatal
88H
Fatal
89H
† Retry: the command should be reissued or retried
‡ See description for more details on the cause for this error, and how to recover from the error
76
This section lists the error code, error type, and descriptions for the
library.
Note: If an unrecoverable error occurs, the error message will
remain on the OCP until another button is pushed.
Description
This status indicates no error has occurred.
Invalid command error: indicates that the loader received an undefined
command or an invalid parameter to a command.
Undefined error codes
A cartridge is in transit after a reset or power up. This error will occur
whenever a power-cycle or reset occurs during a move. The loader
controller will insure that the cartridge is fully loaded onto the CHM and
then will proceed with power-on self-tests.
The library controller will be responsible for moving the cartridge either
to its home location, if known, or to the drive before issuing the
Extended Scan Magazine
Did not find pusher home position during mechanical initialization.
Did not find
PUSHPOS 1
Time-out while moving a cartridge onto or off of the CHM during
mechanical initialization.
Time-out finding CHM home position during mechanical initialization.
Time-out while trying to find
Quantum|ATL PowerStor L200 Series Library User's Guide
command.
during mechanical initialization.
during mechanical initialization.
PUSHPOS 2