Unpacking The Library; Receiving The Library; Unboxing The Library; Positioning The Library - Quantum P4000 Unpacking Instructions Manual

Automated tape library

Hide thumbs Also See for P4000:

Table of Contents

Unpacking the Library

• Keep the library turned off during all installation procedures.

• Keep the library power cord plugged into a grounded power

outlet except when working with AC electrical components.

• Avoid contact with power supplies, EMI filters, and AC electrical

components while the library is connected to a power outlet.

• Use an antistatic wrist strap.

• Keep static-sensitive parts in their original shipping containers

until ready for installation.

• Do not place static-sensitive parts on a metal surface. Place them

inside their protective shipping bag or on an antistatic mat.

• Avoid touching connectors and other components.

Dry climates and cold-weather heating environments have

Note:

lower relative humidity and are more likely to produce static

electricity.

This section explains how to unpack the library and move it to its final

installation location. The ATL P4000 is shipped in packing materials

designed to protect it from damage during transit. By following these

instructions, you help ensure that the library will continue to be

safeguarded after it arrives at the installation site.

The following are the major steps in this procedure:

• Unpacking the library

• Leveling the library

Unpacking the Library

Quantum ATL 4000 Library Unpacking Instructions

Document 6434005-02, Ver. 2, Rel. 0

August 2002

Table of Contents