Table of Contents
Advertisement
Appendix B Error Messages and Definitions
Error
Code
Error Type
Fatal
B1H
Non-error
B2H
Non-error
B3H
See
B4H
‡
description
See
B5H
‡
description
†
Retry
B6H
Fatal
B7H
†
Retry
B8H
Fatal
B9H
Fatal
BAH
Fatal
BBH
Fatal
BCH
Fatal
BDH
Fatal
BEH
Fatal
BFH
† Retry: the command should be reissued or retried
‡ See description for more details on the cause for this error, and how to recover from the error
80
Description
Stand-alone mode
Door open without getting a command. After power-up, this command
can occur as the loader remembers the state of the door.
This is an informational error message and does not require recovery.
Unit was reset or powered up. This is an informational error message and
does not require recovery.
Time-out while prepositioning the CHM during a prepositioning
command. Reissue
Scan Magazine
Did not find all expected slots during an CHM movement. This error can
occur during a load or unload of a cartridge or a
command. Reissue
Scan Magazine
command.
Time-out while opening the drive handle, after operate handle command
was received.
UART test failure
Time-out while closing the drive handle after operate handle command
was received.
Undefined error codes
RAM error
ROM error
CTC error
Undefined error codes
Quantum|ATL PowerStor L200 Series Library User's Guide
, followed by
Preposition
Preposition
, followed by the original
.
Advertisement
Table of Contents
