Unpacking The Library; Receiving The Library - Quantum P7000 Unpacking Instructions Manual

Unpacking the Library

Receiving the Library

• Keep the library power cord plugged into a grounded power
outlet except when working with AC electrical components.
• Avoid contact with power supplies, EMI filters, and AC electrical
components while the library is connected to a power outlet.
• Use an antistatic wrist strap.
• Keep static-sensitive parts in their original shipping containers
until ready for installation.
• Do not place static-sensitive parts on a metal surface. Place them
inside their protective shipping bag or on an antistatic mat.
• Avoid touching connectors and other components.
Dry climates and cold-weather heating environments have
Note:
lower relative humidity and are more likely to produce static
electricity.
This section explains how to unpack the library and move it to its final
installation location. The ATL P7000 is shipped in packing materials
designed to protect it from damage during transit. By following these
instructions, you help ensure that the library will continue to be
safeguarded after it arrives at the installation site.
The following are the major steps in this procedure:
• Receiving the library
• Unboxing the library
• Positioning the library
• Unpacking the library
• Leveling the library
0
Unpack the library as close to the installation site as possible. Inspect
the shipping pallet and carton for damage that may have occurred
during shipment. Report any damage to the shipper.
The ATL P7000 with 16 DLT7000 tape drives weighs
Caution:
approximately 1444 pounds (656 kg). Use at least two
people to move and install the library.
Unpacking the Library
Quantum ATL P7000 Unpacking Instructions
Document 6434006-02, Ver. 2, Rel. 0
August 2002
0
7