Figure 11 Slot Locations - Quantum PowerStor L200 Series User Manual

Chapter 4 Using the Library
Using the Library Door
Figure 11 Slot
Locations
40
Internal
drive
Internal
slots 7-8
Magazine
slots 1-6
Caution: To prevent cartridge jams, use the space on the front
of the cartridge for labels. Do not put labels on any
other location.
Caution: Never attempt to move the CHM manually. Damage
to the library may occur if the CHM is blocking
access to the fixed cartridge slot. Recycle power and
wait until Library Idle is displayed on the OCP.
The CHM will then be in its home position.
Note: Use physical slot 1 (OCP slot 0) when performing a drive
microcode update; use physical slot 8 (OCP slot 7) when
using the optional AutoClean mode.
Note: Insert and remove all cartridges from the front of the
magazine.
Quantum|ATL PowerStor L200 Series Library User's Guide