GE Voluson P6 Service Manual page 254

GE H DRAFT
EALTHCARE
DIRECTION 5459672-100, R
5-11-2-3 Remote Access
Remote access is ONLY possible if the service platform is properly configured (either by the user
NOTICE
or a GE technician at site). Operation see:
!! NOTICE:
This offers GE technicians the possibility to view the entire customer´s desktop and operation system.
Remote access to the Voluson® P8 / Voluson® P6 scanner requires permission and customer input to
run diagnostics.
"Disruptive Mode" can be selected by the customer directly on the Voluson® P8 / Voluson® P6 (as
described below), or remotely by the service technician or OLC.
1.) If not already in read mode, FREEZE the image.
2.) Move the cursor to the GE icon and press the
3.) Select Connect Clinical Lifeline (see:
This activates "Disruptive Mode" and "VCO" for the application OLC to quickly assist the customer.
NOTE: Visual information about the network status is shown in the status area on the bottom of the screen.
Gray = Idle State
Green = Active State
4.) If you select Cancel, "Disruptive Mode" and "VCO" is turned OFF.
6 DRAFT (J
EVISION
Figure 5-24 Connect Clinical Lifeline
Remote access is inactive.
Disruptive Mode and Virtual Console Observation (VCO) is enabled. Remote Access
is active.
Chapter 5 - Components and Functions (Theory)
17, 2013)
ANUARY
Section 7-5-7 "CSD: Configuration" on page
right trackball key
Figure 5-24 below).
V ® P8 / V
OLUSON OLUSON
P S
ROPRIETARY ERVICE
7-25.
(= right-click).
Cancel (disable)
Connect Clinical Lifeline
(enable)
GE icon
® P6
M
ANUAL
5-47