GE Voluson P6 Service Manual page 277

GE H RAFT
EALTHCARE
DIRECTION 5459672-100, R
Please wait until the final window
6.) Remove the System DVD from the DVD/CD+R/RW Drive.
In the displayed menus select [Exit] -> [Exit/Reboot].
7.) During startup, press the DEL key immediately, to enter the BIOS Setup.
8.) Using the keyboard set "Boot Device Priority" order back to 1. boot device: Hard Disk:
-
9.) Exit and Save BIOS Settings: Confirm the "Save configuration changes and exit now?" message
with YES and ENTER. The system boots with windows.
NOTICE
An automated process was developed to check disk, assign an unique computer name and matching
drive letters. The system will reboot at least 2 times!
5-70
6 DRAFT (J
EVISION
(Figure 5-50
Figure 5-50 New Harddisk setup OK
Figure 5-51 Exit -> Exit/Reboot
BIOS Setup Utility (Congatec Dual-core PC-Motherboard installed):
1st Boot Device [P0-xxx] = HDD = Third Master
2nd Boot Device [xxx DVD-RW] = Primary Master
Section 5-15 - LINUX - Voluson Maintenance System
17, 2013)
ANUARY
below) appears and then press ENTER.
V ® P8 / V
OLUSON OLUSON
P S M
ROPRIETARY ERVICE
® P6
ANUAL