GE H
DRAFT
EALTHCARE
DIRECTION 5459672-100, R
Section 8-9
Replacement of Monitor
8-9-1
Manpower
2 people, 10 minutes
8-9-2
Tools
Philips screwdriver, Allen Wrench
8-9-3
Remove Procedure
1.) Open the LCD LID COVER. Refer to the figure below.
2.) Loosen the cable screw. Refer to the figure below.
3.) One person to grab the MONITOR and not to drop it. Other to the persons should unscrew the 2
hexagonal socket screws and then separate hte MONITOR for the MONITOR STAND ARM. Refere
to the figure below.
6
DRAFT (J
EVISION
Figure 8-22 Removing the LCD COVER
Figure 8-23 Loosining the Monitor Cable screw
Chapter 8 - Replacement Procedures
17, 2013)
ANUARY
Unscrew the fastener and disconnect
the cable
Unscrew fastener and remove
LCD cable clamp
Unscrew 2 fasteners
V
® P8 / V
OLUSON
OLUSON
P
S
ROPRIETARY
ERVICE
LCD Cover
® P6
M
ANUAL
8-21