GE Voluson P6 Service Manual page 332

GE H DRAFT
EALTHCARE
DIRECTION 5459672-100, R
7-9-6-4 PIR Overall Test
This diagnostic test performs the self-diagnosis of each electric component and interface in PIR board.
Table 7-5
Table 7-5
Sub-section
7-9-6-4-1
7-9-6-4-2
7-9-6-4-3
7-9-6-4-4
7-9-6-4-1 Voltage Test
It verifies Each Power Voltage Levels on PIR board, and displays the current voltage levels and the test
result as PASSED/FAILED.
7-9-6-4-2 FPGA(PIR) Configuration Test
It verifies FPGA configuration on PIR board by reading/writing test data, and displays the test result as
PASSED/FAILED.
7-9-6-4-3 IIC(PIR) Interface Test
It verifies I2C path named I2C_PIR by using EERPOM on PIR board, and displays the test result as
PASSED/FAILED.
7-9-6-4-4 VPD(PIR) Test
It verifies VPD Information embedded in EEPROM on PIR board, and displays the part of VPD
information and the test result as PASSED/FAILED.
7-9-6-5 CPS Overall Test
This diagnostic test performs the self-diagnosis of each electric component and interface in CPS board.
Table 7-6
Table 7-6
Sub-section
7-9-6-5-1
7-9-6-5-2
7-9-6-5-3
7-9-6-5-4
7-9-6-5-5
7-9-6-5-6
7-9-6-5-1 Voltage Test
It verifies Each Power Voltage Levels on CPS board, and displays the current voltage levels and the
test result as PASSED/FAILED.
6 DRAFT (J
EVISION
below outlines Voluson® P8 / Voluson® P6 Diagnostics Tool described in the sub-sections.
Automatic diagnostic test under PIR Test
Voltage Test
FPGA(PIR) Configuration Test
IIC(PIR) Interface Test
VPD(PIR) Test
below outlines Voluson® P8 / Voluson® P6 Diagnostics Tool described in the sub-sections.
Automatic diagnostic test under CPS Test
Voltage Test
IIC(CPS) Interface Test
VPD(CPS) Test
ADM Test
HV Linearity Test
HV Stop Function Test
Chapter 7 - Diagnostics/Troubleshooting
17, 2013)
ANUARY
Description
Description
V ® P8 / V
OLUSON OLUSON
P S M
ROPRIETARY ERVICE
Page Number
7-43
7-43
7-43
7-43
Page Number
7-43
7-44
7-44
7-44
7-44
7-44
® P6
ANUAL
7-43