GE Voluson P6 Service Manual page 362

GE H DRAFT
EALTHCARE
DIRECTION 5459672-100, R
The System detected a problem with your harddisk.
Please do not reboot or shut down the machine!
Please contact your service department as soon as possible.
There is no Printer selected!
Thickness mismatch xx - GIP xx.
Action: restart 3D (go to 2D), restart the system
throw HRS_Exception(err_msg);
throw HRS_Exception(error.ErrorMessage());
throw HRS_Exception(error.what());
throw HRS_Exception(str);
Timeout, xx of xx cycles OK
Tx-Power to HW : Unkown Systemtype.
Action: restart the system, If after restart not ok then call technical support
UI_BBC_ArchiveWnd : incomplete implementation for....
UI_BBC_ArchiveWnd::vSet() has an wrong ImageType. Action: restart the system
UI_BBC_ArchiveWnd::vSet() will change from eB_Wnd to wrong ImageType.
Action: restart the system
UI_BBC_ArchiveWnd::vSet() will change from eBBC_Wnd to wrong ImageType.
Action: restart the system
UI_BBC_Wnd::vSet() has an wrong ImageType.
Action: restart the system
UI_BBC_Wnd::vSet() will change from eB_Wnd to wrong ImageType
Action: restart the system
UI_BBC_Wnd::vSet() will change from eBBC_Wnd to wrong ImageType.
Action: restart the system
UI_Manager: failed to create BBC Wnd. Action: restart the system
UI_Manager::vDestroyWnd: dynamic cast to UI_MMC_Wnd* failed
UI_Manager::vDestroyWnd: dynamic cast to UI_PW_Wnd* failed
UI_Manager::vHRS_Execute multiple call
Unable to complete export the TA!
Unable to complete export the TA!Unable to create new HDF5 file for TA!
Unexpected exception occurred!!
Unhandled Probe-EEPROM data type on Attempt to read Probe-ID from an invalid
probe connector. Action: restart system
Unhandled Probe-EEPROM data type on left probe connector (A).
6 DRAFT (J
EVISION
Error Messages
Chapter 7 - Diagnostics/Troubleshooting
17, 2013)
ANUARY
if possible,
• save "Full Backup" (see:
"DVD/CD", "Network", or "Other drive" (including images)
• if not currently done, save "Image Archive"
(see: Section 4-5-6-1 on page
• call technical support
select a printer
restart 3D (go to 2D); restart the system
restart the system
restart the system
restart the system
restart the system
please call online center (OLC should contact R&D)
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
check free disk space
restart the system
Connect another probe
Connect another probe
V ® P8 / V
OLUSON OLUSON
P S M
ROPRIETARY ERVICE
Actions
Section 4-5-3 on page 4-39) to
4-44),
® P6
ANUAL
7-73