GE Voluson P6 Service Manual page 284

GE H DRAFT
EALTHCARE
DIRECTION 5459672-100, R
5-15-8 Memory Check in LINUX
1.) Turn system OFF and then back ON.
2.) As soon as the "Boot Screen" appears (see:
[↓ Arrow down] key on the keyboard until the Memtest item is highlighted, then press ENTER.
NOTICE
After 3 sec. without pressing any key, the system will boot-up in windows.
If you missed step 1, retry again with CTRL + ALT + DEL.
!! NOTICE:
The PC Memory Test will start automatically and will take about 0.5 hours.
If there are errors they will be listed.
elapsed test time
list of errors
After one cycle (~ 0.5 hours) the memory check starts again. To interrupt the test, press the ESC key.
NOTICE
If you don't interrupt the memory test by pressing the ESC key, it will perform never ending cycles of
!! NOTICE:
memory checks.
NOTE: If after one cycle (about 0.5 hours), no error messages are listed, it can be assumed that the Back End
Processor including power supply is working properly.
6 DRAFT (J
EVISION
Figure 5-56 Memory check in LINUX
Chapter 5 - Components and Functions (Theory)
17, 2013)
ANUARY
Figure 5-36 on page
V ® P8 / V
OLUSON OLUSON
P S M
ROPRIETARY ERVICE
5-55), press the PG DN
® P6
ANUAL
5-77