Polycom MGC+100 Release Note page 59

Table 7: System Limitations (Continued)
No. Category
7. Audio+
Audio+8
8.
9. Cascade
Cascade
10.
Cascade
11.
CDR
12.
13. Circular
mode
Circular
14.
mode
15. Circular
mode
16. CP
CP
17.
18. CP
CP
19.
Description
'The "Reserved" and "Active" columns
of the Audio+ Resource Report show
wrong port numbers.
Audio+8 card does not support
participants using T1-CAS lines and
G.729 endpoints.
The speaker is assigned a wrong site
name when cascading Continuous
Presence and Video Switching
conferences.
No Cascade in CP Quad conferences.
Cascading is not available for Software
CP conferences.
"Low Memory" alert may appear on
screen when retrieving large
(megabyte and larger) CDR files.
After the conference start, different
resources are used than those
allocated during the conference
reservation.
Creating a new ISDN service while a
conference is running will disable the
option to add another participant to the
existing conference.
Moving participants from one
conference to another and terminating
the original conference result in
resources reallocation.
In a Continuous Presence conference
set to Same Layout, in the Click&View
application the Personal Layout option
is enabled although this option is not
applicable to the Same Layout mode.
In a CP conference, the speaker
position in the CP layout window is not
maintained when the layout is changed
back and forth.
In a conference set to H.264 CIF, when
the Exclusive Speaker is changed the
Video Protocol also changes to H.263.
With an endpoint set to Personal
Layout, when a Video parameter is
altered, the video layout changes
automatically to Conference Layout.
Corrections, Pending Issues and Limitations
Workaround/
ID#
Remarks
20779 The columns "Non
reserved" and
"Total" show the
right number of
ports
14611
13289
18716
5192
15132
20743
20726 Create a new
conference.
20700
11605
13703
18244
19498
55