Appendix - Adding An Mcu To The Network - Polycom MGC+100 Release Note

Appendix - Adding an MCU to the Network

To add an MCU to the MCU Network:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Right-click the MCU Network icon, and then click Add MCU.
Alternatively, on the MCU menu, click Add MCU.
The Add MCU dialog box opens.
In the Name box, enter the name of the MCU. Specify a name that clearly identifies the
MCU.
In the IP Address box, enter the IP Address of the MCU. The correct IP address should
be obtained from your network administrator.
The correct Port Number appears in the dialog box.
Enter the user name of the MCU in the User Name field.
Enter the MCU password in the Password field.
Click the Add button. The Add MCU dialog box closes. A new icon with the specified
MCU name appears in the Browser pane below the MCUs Network icon.
Appendix A - Falcon Diagnostic Tool
81