Detailed Description - General; Network Time Protocol (Ntp) For Xpek Systems; Detailed Description - Polycom MGC+100 Release Note

Polycom mgc+100 network: release note

Hide thumbs Also See for MGC+100:

Table of Contents

Detailed Description - General

The Network Time Protocol (NTP) on XPEK systems allows the MCU to synchronize the

internal MCU control unit's clock with an external NTP server. Accurate time calculation is

essential for cascaded or recurring conferences.

The time synchronization protocol used in MGC version 7.5 is SNTP (Simple Network

Time Protocol), a version of the NTP protocol used by Microsoft's W32Time Service. NTP

servers use the time-zone independent Universal Time Coordinated (UTC) standard to

synchronize networked computers. UTC is the current official standard that is based on an

atomic clock and ensures uniform time calculation for networks.

To synchronize MCU time with the NTP Server:

Right-click the MCU icon and click MCU Time.

Detailed Description - General

Table of Contents

Mgc+50 Mgc-25 Mgc-50 Mgc-100