Table of Contents
Advertisement
"call_settings" Module: Call Settings
The call settings configure data related to a user's call preferences. The data is stored
internally at /mnt/flash/CallSettings.xml.
All the call settings (except one) follow the format: call_settings.account.x.[element] where
x is an account number ranging from 1 to 3.
General configuration file settings
Setting:
Description:
Values:
MAC-specific file settings
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
C620 Administrator and Provisioning Manual
call_settings.early_media_preferred
Controls what to do when 180 Ringing message is received after 183
Session Progress message (SDP): ignore it and continue with early
media (1), or switch to local RBT (0).
when set to 1, after 183 is received, early media will be played on
handset even if 180 is received afterward.
when set to 0, local ringback tone will be played if 180 is received
after 183.
0, 1
call_settings.account.x.block_anonymous_enable
Enables or disables anonymous call blocking.
0 (disabled), 1 (enabled)
call_settings.account.x.outgoing_anonymous_enable
Enables or disables outgoing anonymous calls.
0 (disabled), 1 (enabled)
call_settings.account.x.dnd_enable
Enables or disables Do Not Disturb for account x.
0 (disabled), 1 (enabled)
call_settings.account.x.call_fwd_always_enable
Enables or disables Call Forward Always for account x.
0 (disabled), 1 (enabled)
165
Default:
0
Default:
0
Default:
0
Default:
0
Default:
0
Back to Contents
Advertisement
Table of Contents
