Table of Contents
Advertisement
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
C620 Administrator and Provisioning Manual
sip_account.dirty_host_ttl
Specify the "Time to Live" (TTL) for dirty hosts in seconds. This means
that, when a phone was unable to reach a host, the phone will not try to
reach this host again until the time specified in this field has elapsed.
If this setting is 0 or empty, it has no effect (the host is set as "dirty" but
only for 0 seconds, which means it will have no effect on future requests).
0-7200
sip_account.mac_info_in_every_sip_message
Extends the User Agent Header by the MAC address in all SIP
messages. When enabled, the MAC address is added to *every* SIP
message (all IDs), in the following way:
_User-Agent:_ snomM200/FWversion MAC
e.g.
User-Agent: snomC520/v1.40.40-1 000413...
0 (disabled), 1 (enabled)
sip_account.pnp_local_sip_port
Local SIP port for the purpose of checking ua-profile event to process
provisioning PnP upon received notification.
1-65535
sip_account.service_unavailable_handling_option
Configuration option to handle two modes of failover.
1 = failover triggered by un-responsive server
0 = failover triggered by network received 503 sip reponse.
We can only parse Retry-After if value=1. So if we need to honor
Retry-After, we need to set value=1.
0, 1
128
Default:
0
Default:
0
Default:
5170
Default:
1
Back to Contents
Advertisement
Table of Contents
