Snom C620 Administrator And Provisioning Manual page 93

3. To begin installing the conference phone firmware, click
Installing handset firmware. Please wait... appears. To cancel the download,
click
After clicking
appears on the conference phone.
After a successful update, the message Firmware installation successful appears on
the WebUI.
An error message appears if:
the conference phone firmware is already up to date.

the conference phone firmware URL is incorrect, or the file cannot be retrieved for

any other reason.
the conference phone firmware file is corrupted.

the conference phone doesn't recognize the firmware file. For example, the

firmware file may belong to a different ErisTerminal product.
To install the firmware on the conference phone:
Your conference phone will automatically initiate the firmware update after a short
period of time, as long as there are no active calls on the base station. If you wish
to manually start the firmware update, perform the steps below.
1. On the conference phone, press
2. Select Admin settings.
3. Enter the admin password. The default is admin. To switch between entering
uppercase letters, lowercase letters and numbers, press the middle soft key until its
label displays
4. On the Admin settings menu, select Firmware update.
The conference phone checks for new firmware. If new firmware is found, the
conference phone screen asks you to proceed with the update.
Using the WebUI
C620 Administrator and Provisioning Manual
.
, the message System update in progress. Please wait...
, and then select Status & Settings.
ABC , abc or 123
93
. The message
.
Back to Contents