C620 Configuration Methods - Snom C620 Administrator And Provisioning Manual

C620 Configuration Methods

You can configure the C620 using one of the following methods:
From the conference phone using the menus. The conference phone menus are

best suited to configuring a few settings, perhaps after the initial setup has been
done. For administrators, the settings available on the conference phone Admin
Settings menu include network settings, account settings, and provisioning
settings. See
settings accessible on the conference phone are most useful for end users.
Through the User Settings menu, they can customize the screen appearance,
sounds, and manage calls. For more information, see the C620 User Manual.
The Web User Interface, or WebUI, which you access using your Internet browser.

See
navigate and best suited to configuring a large number of C620 settings at once.
The WebUI gives you access to every setting required for configuring a single
device. You can enter service provider account settings on the WebUI, configure
the soft keys, and set up provisioning, which will allow you to automatically and
remotely update the C620 after initial configuration.
Provisioning using configuration files. Working with configuration files enables you

to configure the device at regular intervals. There are several methods available to
enable the C620 to locate and upload the configuration file. For example, you can
enable the C620, when it starts up or reboots, to check for the presence of a
configuration file on a provisioning server. If the configuration file is new or has
been modified in any way, the C620 automatically downloads the file and applies
the new settings. For more information, see
Files" on page
Introducing the C620
"Using the Admin Settings Menu" on page
"Using the WebUI" on page
109.
15
C620 Administrator and Provisioning Manual
35. The browser-based interface is easy to
"Provisioning Using Configuration
23. Many of the user
Back to Contents