Hs_Settings" Module: Handset Settings - Snom C620 Administrator And Provisioning Manual

"hs_settings" Module: Handset Settings

The Handset Settings allow you to configure account assignments and names for the
devices that are registered to the base station. For more information on registering devices,
see the C620 User Guide.
The following parameters are used to customize the soft keys.
hs_settings.x.pfk.softkey.y.idle.feature
hs_settings.x.pfk.softkey.y.idle.label
hs_settings.x.pfk.softkey.y.idle.value
hs_settings.x.pfk.softkey.y.idle.account
hs_settings.x.pfk.softkey.y.call_active.feature
hs_settings.x.pfk.softkey.y.call_active.label
hs_settings.x.pfk.softkey.y.call_active.value
hs_settings.x.pfk.softkey.y.call_active.account
hs_settings.x.pfk.softkey.y.call_held.feature
hs_settings.x.pfk.softkey.y.call_held.label
hs_settings.x.pfk.softkey.y.call_held.value
hs_settings.x.pfk.softkey.y.call_held.account
hs_settings.x.pfk.softkey.y.live_dial.feature
hs_settings.x.pfk.softkey.y.live_dial.label
hs_settings.x.pfk.softkey.y.live_dial.value
hs_settings.x.pfk.softkey.y.live_dial.account
Soft keys appear on the phone screen in the same order as the y index of the soft key
parameters. For example, the following parameter/value combination will result in the Idle
screen shown below.
hs_settings.1.pfk.softkey.1.idle.feature = redial
hs_settings.1.pfk.softkey.1.idle.label = (blank)
hs_settings.1.pfk.softkey.1.idle.value = (blank)
hs_settings.1.pfk.softkey.1.idle.account = 0
hs_settings.1.pfk.softkey.2.idle.feature = select_line
hs_settings.1.pfk.softkey.2.idle.label = (blank)
hs_settings.1.pfk.softkey.2.idle.value = (blank)
hs_settings.1.pfk.softkey.2.idle.account = 0
hs_settings.1.pfk.softkey.3.idle.feature = dir
hs_settings.1.pfk.softkey.3.idle.label = (blank)
hs_settings.1.pfk.softkey.3.idle.value = (blank)
hs_settings.1.pfk.softkey.3.idle.account = 0
Configuration File Parameter Guide
C620 Administrator and Provisioning Manual
133
Back to Contents