Snom C620 Administrator And Provisioning Manual page 42

Setting
User Identifier
Authentication Name
Authentication Password
Dial Plan
Call Restriction Dial plan
Inter Digit Timeout (secs)
Maximum Number of
Calls
Feature Synchronization
Line Type
Barge-in
DTMF method
Unregister after reboot
Using the WebUI
C620 Administrator and Provisioning Manual
Description
Enter the User identifier supplied by your service provider.
The User ID, also known as the Account ID, is a SIP URI
field used for SIP registration.
Note: Do not enter the host name (e.g. "@sipservice.com").
The WebUI automatically adds the default host name.
If authentication is enabled on the server, enter the
authentication name (or authentication ID) for
authentication with the server.
If authentication is enabled on the server, enter the
authentication password for authentication with the server.
Enter the dial plan, with dialing strings separated by a |
symbol. See "Dial Plan" on page
Used to restrict users from dialing out numbers through dial
plan matching on a per-account basis.
Sets how long the conference phone waits after any "P"
(pause) in the dial string or in the dial plan.
Select the maximum number of concurrent active calls
allowed for that account.
Enables the C620 to synchronize with BroadWorks
Application Server. Changes to features such as DND, Call
Forward All, Call Forward No Answer, and Call Forward
Busy on the server side will also update the settings on the
conference phone menu and WebUI. Similarly, changes
made using the conference phone or WebUI will update the
settings on the server.
Select the line type to Private or Shared. A private line will
be accessible only at the C620 you are configuring. Shared
lines can be assigned to more than one SIP endpoint.
For more information about using shared lines, see the
C620 User Guide.
Not applicable.
Select the default DTMF transmission method. You may
need to adjust this if call quality problems are triggering
unwanted DTMF tones or you have problems sending
DTMF tones in general.
Enables the phone to unregister the account(s) after
rebooting-before the account(s) register again as the
phone starts up. If other phones that share the same
account(s) unregister unexpectedly in tandem with the
rebooting C620, disable this setting.
42
44.
Back to Contents