Snom MeetingPoint Quick Start Manual

NAvIGATE IN MENUS AND MAKE SETTINGS
 Press (MENU).
 Select the option you want from the menu using the arrow keys. Press OK (tick) to con-
firm.
The option chosen from the menu is highlighted. Press "Slct" function key to make a choice.
Press the OK function key to activate the choice. Press "Conf" to return to conference menu.
Press the ESC function key to leave the menu.
 Cancel the settings dialog or go back one level in the menu by pressing ESC.
 Quit the menu by pressing .

Note that after you have made changes to a setting, you need to restart if required.
snom is the leading VoIP phones company based on the open standard SIP protocol.
snom MeetingPoint provides the technology for telephone conferences based on cutting-edge
expertise within acoustics and digital signal processing. A key attribute of this conference phone is
the built-in high-quality audio technology OmniSound ® , providing crystal-clear sound.
It features the well-known snom quality SIP technology compatible to
- Microsoft Office Communication Server 2007 R2
®
- CISCO Call Manager
- Broadsoft Broadworks
- Asterisk, FreeSwitch, FreePBX based IP-PBXs
- Software-based PBX systems like pbxnsip or 3CX
and many others and integrates seamlessly in the widest range of existing VoIP solutions.
Read more about snom and our VoIP family of products on www.snom.com.
OmniSound
® is a registered trademark of Konftel AB.
The names of actual companies and products mentioned herein are the
trademarks of their respective owners.
snom technology AG
Charlottenstr. 68–71
10117 Berlin
Germany
© snom technology AG 2009
snom_mt_pt_106
www.
E N G LI S H
Quick Start Guide
v1.06
MeetingPoint
The snom MeetingPoint is a Conference phone for IP telephony.
Further information is available on our website: www.snom.com/snomMeetingPoint.
Display screen
LEDs
Speaker Microphone Keypad
Flashing blue Incoming call
Steady blue light Call in progress, missed call
Flashing red Hold, microphone and speaker
turned off
Steady red light Mute, microphone turned off
Network cable port
SD memory card port
Expansion
microphone
port
Display symbols
AUX port
In conference mode
NOTE:
Conference timer
Security lock port
Replace the Konftel logo, with this snom logo.
Same silver, metallic looking colour.
Conference parties Power supply port
Scroll Expansion microphone port
down/right
Scroll
Function key as indicated
up/left as
Put conference
indicated
on hold
Function key Function key
Add party End conference
Function keys
Activate function
Context navigation Context navigation
Line selection
Hang up/end line
Answer/connect new
End conference
line
Hold/Unhold
MENU,
Mute
settings menu
Conference (double click)
Increase volume
Conference State/Hold
Start/end/back
Decrease volume
recording
Alphanumerical keypad
NOTE: